Cast iron swirled tail casement window latch. This latch is available in matte black or a rust patina.

When security is a priority, this heavy duty shutter bolt does the job. Crafted from 1/4-inch thick cast iron, it's as strong as they come. Finished with a black primer coat (paint prior to installing).

Reading Hardware originally created this lovely sash lift as part of their extensive Windsor hardware pattern. We've reproduced the circa 1885 Aesthetic design in durable cast iron, perfectly capturing the delicate pattern of waves and flowers. Choose from matte black powder coat or lacquered antique iron finishes.

Our set of 4 1/8-inch Connecticut shutter hinges offer traditional Colonial style. Constructed from cast iron, they feature a textured surface and rust-resistant, durable black powder-coated finish. Sold as a complete set for two shutters. Can be mounted on wood or masonry with the included lag bolt (masonry lag shield anchors not included).

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Our C-Hooks are ideal for attaching weights to the sash chains on your double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to old style weights with a hole on the top.

Our 7/8-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

With a 2 1/4-inch offset, these traditional arch-top pintles are suited for brick homes, or homes with extra thick window trim. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty galvanized cast iron with a rust-resistant powder-coated finish.

Our Pair of 6 1/4-Inch Mini Strap Hinges offer traditional Colonial style. Constructed from cast iron, they feature a textured surface and rust-resistant, durable black powder-coated finish.

This handsome shutter bolt is micro sized and is best suited for small shutters. The curled handle is forged iron and the base plate is cast. Rough textured with a satin black powder coat.

Despite it name, our Rat-Tail Surface Door and Shutter Bolt is an elegant addition to any home. Ideal for colonial or other rustic home styles, it has a smooth surface and durable powder-coat black finish. Two length options allow it to be used on a variety of applications from gates and doors to cabinets.

A single small flower and a banded border give this iron sash lock a decorative touch. Pair it with fancy iron sash lifts for a complete Victorian look. Cast from heavy duty iron with a lacquered antique finish.

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for four opening positions. Offered in durable matte black, lacquered antique iron or rusted iron finishes, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

Use these traditional tapered shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). They are designed to work with 7/16-inch diameter pintles and have a 1 1/2-inch offset. Made of heavy-duty galvanized steel with rust-resistant and powder-coated finish.

A gently rolled handle adds an artisan touch to our 5-Inch Cast-Iron Surface Door and Shutter Bolt. Ideal for Colonial or other rustic home styles, it has a textured surface and durable black powder-coat finish. Three strike plate options allow it to be used on a variety of applications from gates and doors to cabinets.

Hammered edges, a rough texture, and an artfully curled tail give these sturdy shutter dogs an authentic colonial flavor. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

Our heavy-duty cast iron casement latch is ideal for Early American or other rustic styles of home. With its artfully curled handle and 3 strike options, it's a wonderful latch for cabinets, gates or shutters as well!

The bolt on this colonial style shutter fastener is nearly 1/2-inch thick - the thickest and strongest we know of. Made of very heavy duty cast iron, it keeps your shutters securely battened down. Finished with a black primer coat (paint before installing).

These Victorian shutter fasteners are typically paired with Clarks Tip or full mortise type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Raw cast iron, painting required.

Our solid iron casement adjuster is equally at home in Colonial, Tudor or Spanish style homes. The curled tail is delightfully decorative and practical as well, making it easy to grasp and lift. Extra thick and heavy duty, it's a good choice for large windows. Choose from matte black, lacquered antique iron or rusted iron finishes.

Replacement eye piece for hook and eye sets. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.. Will accept a hook up to 5/16-inch in diameter.

A traditional symbol of hospitality and conviviality, the grape motif is a fabulous way to enliven your home's exterior. Made of heavy duty cast iron, these durable shutter dogs are finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

The Colonial look of our 12-Inch Suffolk-Style Shutter Strap Hinges (1 1/2-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. These versatile designs can be mounted to show, whether the shutters are open or closed. They feature a textured surface and rust-resistant, powder-coated finish.

A simple twisted rod and a pair of eyelet screws add up to a rustic yet stylish shutter fastener. The Spanish / Tudor design is rendered in forged iron and galvanized with a protective black powder coat. Also useful as a door hold.