These traditional Colonial style 1 1/2-inch offset hinges with plate pintle are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

Get the look of a functional shutter hinge with this handsome acorn-tip dummy. It's ideal for wood or vinyl shutters that are mounted directly to the wall - simply attach it with wood screws to the side of the panel. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

This pair of lightweight and sturdy stays is adjustable from 22-inch to 34-inch length. This set can be used for small to large Bahama or Bermuda shutters and is made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set.

These traditional Colonial style 3/4-inch offset hinges with plate pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 1 1/4-inch offset (2 1/2-inch throw), which is ideal for most wood framed houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

These cast iron 6-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).

Get the look of a functional shutter hinge with our NY-Style Faux Hinges. This flexible design can be installed on either side of the window, and offers a generous 3-inch mounting range, to accommodate variables in shutter positioning. Can be used in two orientations, providing 0 or 3-inches of throw, and locked at any angle. Comes complete with mounting screws and plastic anchors for masonry use.

This continuous hinge for Bahama or Bermuda shutters is made of two parts which slide together for easy installation and removal

These vertical shutter straps are not only distinctive in appearance - they're ideal for shutters too narrow for horizontal straps. They can also be used with New York style hinge sets on tall shutters as a middle support hinge. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 3/16-inch thick cast iron, they are powder coated to resist rust. Reversible.

Popular throughout the Mid-Atlantic, these Large Georgetown Style Shutter Dogs are distinguished by their artful curl. Hand-forged from heavy duty iron, they are powder coated to resist rust. Easily mounted to masonry with the included lag bolt.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Our Set of 3/4-inch Offset Suffolk-Style L Hinges with Narrow Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

Despite the name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to masonry with the included lag bolt.

Truly a classic, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy duty stainless steel and powder coated black. Easily mounted to masonry with the included lag bolt.

These cast iron 8 1/2-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

This pair of lightweight and sturdy 14 inch stays is designed for small Bahama or Bermuda shutters and made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set.

Our traditional iron hook & eye works on shutters, gates or even doors. Use it to hold them open or securely closed. Made of heavy duty iron, galvanized and finished with a rust resistant black powder coat to coordinate with most exterior hardware. Available in 4 lengths.

True classics, these plate-mount, scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

The gracefully curled ends of our English rat tail shutter dogs reveal the artisan's craft. Hand forged of heavy duty iron, they're finished with a rust resistant black powder coat. Easily mounted to masonry with the included lag bolt.