12" x 24" Carnegie Urethane Resin Return-Air Grille in Oil-Rubbed Bronze Finish
Description
Inspired by 19th-century Beaux-Arts design, our 12 x 24-inch Carnegie Return-Air Grille in Oil-Rubbed Bronze is an authentic reproduction, just like those used in many of the Carnegie libraries throughout the United States. Originally cast in bronze, this modern update is made of durable, high-quality urethane resin that is both light weight and heat resistant. Whether used indoors or out, it will not rust, rot or corrode. Hand cast and finished in the USA. For use on ceilings and walls only, do not install on floors. Pattern varies by grille size, see specs PDF below.
Dimensions:
Boot size: the inside vented area of the grille.
Grille size: 2" greater than the Boot size.
Tensile Strength:7,660 psi.
Flexural Strength: 10,230 psi.
Heat Deflection: 212 degrees F.
Fasteners: 1 5/8" drywall screws w/ color matched cover tabs.
Dimensions:
Boot size: the inside vented area of the grille.
Grille size: 2" greater than the Boot size.
Tensile Strength:7,660 psi.
Flexural Strength: 10,230 psi.
Heat Deflection: 212 degrees F.
Fasteners: 1 5/8" drywall screws w/ color matched cover tabs.
Hardware Tip
Return Air Grilles are specifically designed for wall and ceiling installation, and should not be used as floor grilles.
WARNING: California Proposition 65
ReviewsProduct Q & A