Mortise Locksets, Skeleton Key Door Locks

This lock has solid brass face and strike plates and is available in 4 finishes. The backset is 2 1/4" and the lock box measures 3 3/4" high by 2 7/8" deep.
Item Number:R-01DE-101X

This lock has solid brass face and strike plates and is available in our hand-applied, "living" antique finish. The backset is 2 1/4" and the lock box measures 3 3/4" high by 2 7/8" deep.
Item Number: R-01DE-101-ABH

This lock has solid brass face and strike plates and is available in 3 finishes. The backset is 2 1/4" and the lock box measures 3 3/4" high by 2 7/8" deep.
Item Number: R-01DE-103X

This lock has solid brass face and strike plates and is available in our hand-applied, "living" antique finish. The backset is 2 1/4" and the lock box measures 3 3/4" high by 2 7/8" deep.
Item Number: R-01DE-103-ABH

This mortise lock has a 2 1/4" backset and is available in 6 different finishes.
Item Number: R-01NW-701073X

This lock has a steel case with brass plated face and strike plates. The backset is 2 1/4". The case measures 4" high by 3" deep.
Item Number: R-01HG-214

Standard brass mortise lock with a standard 2 1/4" back set. This mortise lock is available in 3 different finishes.
Item Number: R-01SB-9021X

Privacy mortise lock with solid brass faceplate equipped for a privacy thumb turn.
Item Number: R-01SB-9022X

Brass mortise lock with a narrow back set of 1 3/4". This mortise lock is available in 3 different finishes.
Item Number: R-01SB-9020X

Solid brass small mortise latch with 1 3/8" backset.
Item Number: R-01SE-270033

This narrow size lock has a solid brass case, face and strike. The backset is 1" and the lock box measures 4" high by 1 1/2" deep.
Item Number: R-01AA-L-79L

This narrow size lock has a solid brass case, face and strike. The backset is 1" and the lock box measures 4" high by 1 1/2" deep. This mortise lock is in Antique-By-Hand finish.
Item Number: R-01AA-L-79L-ABH

The on center measurement from the door knob hub to the round part of the keyhole is a non-standard 2 1/2". The backset is a standard 2 1/4".
Item Number: R-01AA-L-102

The on center measurement from the door knob hub to the round part of the keyhole is a non-standard 2 1/2". The backset is a standard 2 1/4".
Item Number: R-01AA-L-102-ABH

This deadbolt lock is solid brass and comes complete with an emergency release button. The rosettes measure 1 5/8" in diameter and are surface mounted.
Item Number: R-01EM-828TPX

Forged brass deadbolt measuring 2 5/8" in diameter and available in 2 3/8" or 2 3/4" backset.
Item Number: R-01EM-8455X

Forged brass deadbolt measuring 2 5/8" in diameter and available in 2 3/8" or 2 3/4" backset.
Item Number: R-01EM-8464X

Forged brass deadbolt measuring 2 5/8" in diameter and available in 2 3/8" or 2 3/4" backset.
Item Number: R-01EM-8450X

The forged brass plates measure 3 1/2" tall by 2 1/2" wide. This deadbolt is designed for a standard 2 1/8" bore and 2 3/8" backset.
Item Number: RS-01NW-733274X

Victorian style single cylinder deadbolt with decorative forged brass plates measuring 3 1/4" tall by 2 1/2" wide. This deadbolt is designed for a standard 2 1/8" bore and 2 3/8" backset. Item Number: RS-01NW-726054X

Egg and Dart style single cylinder deadbolt with decorative forged brass plates measuring 4" tall by 2 1/2" wide. This deadbolt is designed for a standard 2 1/8" bore and 2 3/8" backset. Item Number: RS-01NW-726066X

Meadows style single cylinder deadbolt with decorative forged brass plates measuring 3 1/4" tall by 2 1/2" wide. This deadbolt is designed for a standard 2 1/8" bore and 2 3/8" backset. Item Number: RS-01NW-726060X

Brass rebated mortise lock with a standard 2 1/4" back set. This mortise lock set is also available in chrome.
Item Number: R-01SB-9048X

Brass rebated mortise lock with a narrow back set of 1 3/4". This mortise lock set is also available in chrome.
Item Number: R-01SB-9047X

Mortise dead bolt lock with a 1 3/4" back set complete with 2 skeleton keys. This item is un-lacquered brass.
Item Number: R-01AA-L-54B

This skeleton key lock has 1 3/4" backset and comes with two keys. This mortise dead bolt is in Antique-By-Hand finish.
Item Number: R-01AA-L-54B-ABH

Standard 2 3/8" back set tubular conversion latch with a double spring designed to fit in modern door cut outs.
Item Number: R-01SB-9030X

Non-standard 2 3/4" back set tubular latch which can be used on modern pre-drilled doors.
Item Number: R-01NW-701079X

This roller ball catch has a sturdy spring and is adjustable for varying door gaps. The strike plate measures 2 1/8" tall by 1 1/16" wide.
Item Number: R-01IH-12010X

This roller ball catch has a sturdy spring and is adjustable for varying door gaps. The strike plate measures 2 1/8" tall by 1 3/8" wide.
Item Number: R-01IH-12011X

Standard 2 3/8" back set tubular conversion latch with single spring.
Item Number: R-01MH-BK-182-145

Non standard 2 1/4" back set tubular conversion latch designed to fit in modern door cut out's and facilitate use of either original or reproduction antique door lock sets.
Item Number: R-01VD-574

Non-standard 1 3/4" back set tubular conversion latch designed to fit in modern pre drilled doors and facilitate use of either original or reproduction lock sets.
Item Number: R-01DC-545

Standard 2 3/8" back set tubular latch which can be used on modern pre-drilled doors.
Item Number: R-01NW-701078X