Door Locks, Strikes & Skeleton Keys

This narrow size lock has a solid brass case, face and strike. The backset is 1" and the lock box measures 4" high by 1 1/2" deep.
Item Number: R-01AA-L-79L

This narrow size lock has a solid brass case, face and strike. The backset is 1" and the lock box measures 4" high by 1 1/2" deep. This mortise lock is in Antique-By-Hand finish.
Item Number: R-01AA-L-79L-ABH

Mortise dead bolt lock with a 1 3/4" back set complete with 2 skeleton keys. This item is un-lacquered brass.
Item Number: R-01AA-L-54B

This skeleton key lock has 1 3/4" backset and comes with two keys. This mortise dead bolt is in Antique-By-Hand finish.
Item Number: R-01AA-L-54B-ABH

This mortise lock has a 2 1/4" backset and is available in 6 different finishes.
Item Number: R-01NW-701073X

Brass mortise lock with a narrow back set of 1 3/4". This mortise lock is available in 3 different finishes.
Item Number: R-01SB-9020X

Standard brass mortise lock with a standard 2 1/4" back set. This mortise lock is available in 3 different finishes.
Item Number: R-01SB-9021X

Privacy mortise lock with solid brass faceplate equipped for a privacy thumb turn.
Item Number: R-01SB-9022X

Standard 2 3/8" back set tubular conversion latch with a double spring designed to fit in modern door cut outs.
Item Number: R-01SB-9030X

Brass rebated mortise lock with a narrow back set of 1 3/4". This mortise lock set is also available in chrome.
Item Number: R-01SB-9047X

Brass rebated mortise lock with a standard 2 1/4" back set. This mortise lock set is also available in chrome.
Item Number: R-01SB-9048X

The on center measurement from the door knob hub to the round part of the keyhole is a non-standard 2 1/2". The backset is a standard 2 1/4".
Item Number: R-01AA-L-102

The on center measurement from the door knob hub to the round part of the keyhole is a non-standard 2 1/2". The backset is a standard 2 1/4".
Item Number: R-01AA-L-102-ABH

This lock has a steel case with brass plated face and strike plates. The backset is 2 1/4". The case measures 4" high by 3" deep.
Item Number: R-01HG-214

The forged brass plates measure 3 1/2" tall by 2 1/2" wide. This deadbolt is designed for a standard 2 1/8" bore and 2 3/8" backset.
Item Number: RS-01NW-733274X

Forged brass deadbolt measuring 2 5/8" in diameter and available in 2 3/8" or 2 3/4" backset.
Item Number: R-01EM-8450X

Forged brass deadbolt measuring 2 5/8" in diameter and available in 2 3/8" or 2 3/4" backset.
Item Number: R-01EM-8455X

Forged brass deadbolt measuring 2 5/8" in diameter and available in 2 3/8" or 2 3/4" backset.
Item Number: R-01EM-8464X

Non-standard 1 3/4" back set tubular conversion latch designed to fit in modern pre drilled doors and facilitate use of either original or reproduction lock sets.
Item Number: R-01DC-545

Non-standard 2 3/4" back set tubular latch which can be used on modern pre-drilled doors.
Item Number: R-01NW-701079X

Standard 2 3/8" back set tubular conversion latch with single spring.
Item Number: R-01MH-BK-182-145

Non standard 2 1/4" back set tubular conversion latch designed to fit in modern door cut out's and facilitate use of either original or reproduction antique door lock sets.
Item Number: R-01VD-574

This solid brass door bolt is a great way to add a privacy lock to any door in your house. Classically styled with an oval escutcheon and knob, it's easy to install and operate.

This solid brass door bolt is a great way to add a privacy lock to any door in your house. Classically styled with an oval escutcheon and knob, it's easy to install and operate. Our custom Antique-By-Hand finish blends beautifully with your vintage door hardware.

Add a privacy lock to any door in your house with this solid brass mortised bolt. Classically styled with a pressed oval escutcheon and cast knob, it's easy to install and operate. Choose from 7 traditional and modern finishes.

Solid brass small mortise latch with 1 3/8" backset.
Item Number: R-01SE-270033

This roller ball catch has a sturdy spring and is adjustable for varying door gaps. The strike plate measures 2 1/8" tall by 1 1/16" wide.
Item Number: R-01IH-12010X

This roller ball catch has a sturdy spring and is adjustable for varying door gaps. The strike plate measures 2 1/8" tall by 1 3/8" wide.
Item Number: R-01IH-12011X

Standard mortise lock brass finish steel strike plate. This strike measures 3 3/8" tall by 7/8" wide with the tongue projecting 1/2". Item Number: R-01HG-733

Standard size solid brass mortise lock strike plate measuring 3 1/2" tall by 1" wide.
Item Number: R-01MG-SP1X

Large solid brass mortise lock strike plate measuring 4 1/2" tall by 1" wide.
Item Number: R-01MG-SP2X

This latch strike plate is made of heavy stamped brass and the tongue projects 1/2".
Item Number: R-01BM-8885X

Solid brass replacement strike plate. This strike plate measures 2 3/4" tall, 1 1/8" wide and the tongue projects an additional 3/8". Item Number: R-01P-72-3

Solid brass large replacement strike plate. This strike plate measures 4 7/8" tall, 1 1/4" wide and the tongue projects an additional 5/8".
Item Number: R-01P-74-3

This strong and durable iron skeleton key is designed to work as a master key for interior mortise and rim locks. Featuring a plain flat bit, it may work on about 30% of old locks.

This strong and durable iron skeleton key is designed to work as a master key for interior mortise and rim locks. Featuring a triple notched bit, it may work on about 30% of old locks.

This oversized skeleton key is the type used with Carpenter rim locks in the Colonial and Federal periods. Made of heavy cast brass, it's wonderfully ornamental, as well as potentially functional.

Heavy brass skeleton (or bit) type keys were typically used with Colonial and Federal era rim locks and early mortise locks. Featuring a double notched bit, this cast brass reproduction has the potential to operate some antique locks.

This pretty, antique brass plated skeleton key was designed to work as a master key for antique mortise and rim locks. Featuring a triple notched bit, it's likely to operate around 30% of vintage locks (results not guaranteed).

This pretty, brass plated skeleton key was designed to work as a master key for antique mortise and rim locks. Featuring a triple notched bit, it's likely to operate around 30% of vintage locks (results not guaranteed).

This pretty, brass plated skeleton key was designed to work as a master key for antique mortise and rim locks. Featuring a double notched bit, it's likely to operate around 30% of vintage locks (results not guaranteed).

This lock has solid brass face and strike plates and is available in 4 finishes. The backset is 2 1/4" and the lock box measures 3 3/4" high by 2 7/8" deep.
Item Number:R-01DE-101X

This lock has solid brass face and strike plates and is available in our hand-applied, "living" antique finish. The backset is 2 1/4" and the lock box measures 3 3/4" high by 2 7/8" deep.
Item Number: R-01DE-101-ABH

Extra large entry size solid brass mortise lock strike plate measuring 6" tall by 1 3/16" wide. Finished with our exclusive living patina.
Item Number: R-01BM-8880-ABH

Standard 2 3/8" back set tubular latch which can be used on modern pre-drilled doors.
Item Number: R-01NW-701078X